Hydnet använder cookies för att din upplevelse av webbplatsen ska bli så bra som möjligt. Tryck på OK för att godkänna. Läs mer
OK
Hydnet AB
in English
på Svenska
Din leverantör av hydraulkomponenter
och industristötdämpare

Produkter

Sökning pågår..

Filterpatroner

Sun filter elements are available as Surface Type (Last Chance) and Depth Style elements. The flow path is Port 2 to Port 1 and should not be used in reverse, even with a reverse free flow check valve installed. The elements have a high collapse pressure and are intended to be used in line with the system. Filter life will depend on initial system cleanliness and the amount of dirt ingression to the system when operating. •Differential crush pressure is 3000 psid (210 bar). •The flow path is Port 2 to Port 1 only. •Installation directly above the subplate will protect the entire valve stack from particles. •Surface type element features a 304 stainless steel mesh media. All internal components are 304 stainless steel. •Surface Type elements have a 40 micron nominal rating (63 micron absolute). •Surface Type elements are designed to capture errant particles that may not be trapped in the main system filter or particles resulting from a component failure. •With a correctly assembled system, Surface Type elements will be unnoticed during regular operation, but will provide protection from sudden component failure. •Surface Type (Last Chance) elements have a single layer stainless steel mesh supported by perforated sheet tube.

Symbol
Funktion

Beskrivning

Modell
3D
Kavitet
Nominell kapacitet
2 portar
Filter

FLDA-XD*

3D-ritning
T-13A
40 lpm 40my

FLFA-XD*

3D-ritning
T-5A
80 lpm 40my

FLHA-XA*

3D-ritning
T-16A
32 lpm 3my

FLHA-XB*

3D-ritning
T-16A
32 lpm 10my

FLHA-XC*

3D-ritning
T-16A
32 lpm 25my

FLHA-XD*

3D-ritning
T-16A
160 lpm 40my

FLJA-XA*

3D-ritning
T-18A
95 lpm 3my

FLJA-XB*

3D-ritning
T-18A
95 lpm 10my

FLJA-XC*

3D-ritning
T-18A
95 lpm 25my

FLJA-XD*

3D-ritning
T-18A
320 lpm 40my